Charcoal - Water Soluble Powder

One 20g bag of powder makes 1 litre of wood stain.

Dissolve powders in warm tap water for cost effective, VOC free wood stain. 

Recommended for interior use on bare wood.

Dry powder has an almost unlimited shelf life - keep in sealed bag out of sunlight.

Colour should be sealed with a minimum of two coats of finish and varnishes, oils and wax polishes may all be applied over Bolgers water based wood stains. A water based finish will reactivate the dye allowing some colour to lift; apply the first coat lightly and allow to dry thoroughly before applying a second coat.

Images are for reference only and colours were achieved using 20g of powder dissolved in 1 litre of water: two coats were applied to pine using a cloth. Screen resolution of your viewing device may affect how the colours are displayed, always check colours on a spare piece of the same wood, or in an inconspicuous area. 

Coverage up to 8m² per 1 litre when applying one coat.

Hazard Identification:

Warning:

May cause an allergic skin reaction. Causes serious eye irritation. Toxic to aquatic life with long lasting effects. Avoid breathing dust. Wash hands thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Avoid release to the environment. Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN: wash with plenty of soap and water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do so. Continue rinsing. If skin irritation or rash occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Wash contaminated clothing before reuse. Collect spillages. Dispose of contents/container to landfill.

Formation of airborne dust clouds and dust layers may create an explosion hazard. The product is a dye and will cause staining of the skin and other materials with which it comes into contact.

Shipping weight: 60g