Powder Wood Dye - Water Soluble
Dissolve powders in tap water for cost effective, VOC free wood stain. Also tints water based varnish, water based glues (e.g PVA) and powder fillers which are mixed with water.
Powders have an unlimited shelf life - keep dry and out of sunlight.
How to use: Add 20g of powder to 1 litre of hot (not boiling) water and stir thoroughly to mix. Allow to stand for a few minutes and stir again to ensure all powder has been dissolved. Exceeding 20g of powder per litre of water may result in some sediment forming, this can be remedied by adding a little more warm water to the container before beginning to apply the colour. NB: do not add more water to the mixture once application has begun. Colour can be further diluted to create a wash effect. To mix one or more colours together make up a solution of each colour first and mix the liquids, testing on a spare piece of wood until the desired colour is achieved. When a deeper colour is required apply two or more coats. Depending on the base products colours will vary; always test colour before application.
Images are for reference only and colours were achieved using 20g of powder dissolved in 1 litre of water and applied to pine - results will vary depending on exact ratio of mix and colour of timber. Screen resolution of your viewing device may affect how the colours are displayed and our image is a guide only.
The following powder dye colours carry warnings - full details are supplied on the product label.
Charcoal - Warning - May cause an allergic skin reaction. Causes serious eye irritation. Toxic to aquatic life with long lasting effects.
Green 1 - Toxic to aquatic life with long lasting effects.
Yellow 1 - Warning - May cause an allergic skin reaction.